Smart LED Driver
Make your 26–30W COB lights dimmable and smart
A WiFi LED driver for higher-output 26–30W COB spotlights and downlights — smooth flicker-free 0–100% dimming by app and voice, with no rewiring and no hub.
0–100%Dimming
4.5kVAnti-surge
26–30WCOB range
What the hardware does
0–100% flicker-free dimmingSmooth PWM dimming, stable even at very low brightness.
Wide input 90–300VRuns stably through Indian voltage swings — no stabiliser needed.
Anti-surge up to 4.5kVProtects the driver and light from spikes and grid switching.
Auto-recovery protectionShort-circuit and over-voltage shutdown that resets itself on power cycle.
90% efficient, THD ≤ 10%Runs cool and clean — low heat in the ceiling cavity, little noise on your wiring.
WiFi — no hubConnects straight to the cloud on 2.4GHz; no gateway.
What the app does
0–100% flicker-free dimmingSmooth brightness control, stable even at very low levels, with one-tap scenes.
Schedules & sunrise/sunsetDay-and-time schedules, countdown and auto-off timers, and GPS-based sunrise/sunset triggers.
Voice & quick controlSiri, Google and Alexa for on/off and brightness, plus NFC taps and home-screen shortcuts.
Group your lightsGroup multiple COB lights into a Room or Scene and control them all with one tap or command.
Offline + Safe ModeSchedules keep running without internet; Safe Mode and auto-recovery guard against voltage spikes.
Energy & runtimeRunning hours, estimated energy cost and a full ON/OFF history for every light.
Full specification
| Covers COB wattage | 26W – 30W |
|---|---|
| Dimming range | 0% – 100% |
| Dimming method | PWM — flicker-free |
| Input voltage | 90VAC – 300VAC |
| Frequency | 50 / 60 Hz |
| Power supply topology | Isolated flyback |
| Total harmonic distortion | ≤ 10% @ full load, 230VAC |
| Power efficiency (typical) | 90% @ 230VAC full load |
| Anti-surge | Up to 4.5kV |
| Short-circuit protection | Yes — auto-recovery |
| Over-voltage protection | Yes — auto-recovery |
| Current tolerance | ±5% |
| Connectivity | WiFi (2.4GHz) — direct to cloud, no hub |
| Voice assistants | Google, Alexa, Siri |
| Operating temperature | -10°C to +65°C |
| Operating humidity | 20% – 95% RH |
| Warranty | 3 years |
Common questions
Does the Smart COB Driver (26W–30W) need a neutral wire?
Yes. Every Beakn product needs a neutral wire at the switchboard. Most Indian homes built in the last 15 years have one. If you are not sure, send us a photo of your switchboard on WhatsApp and we will check it for you.
Which voice assistants does it work with?
Google, Alexa, Siri.
Do I need a separate hub or gateway?
WiFi (2.4GHz) — direct to cloud, no hub
What warranty does it come with?
3 years
Ask about the Smart COB Driver (26W–30W)
Your local Beakn person is .
Pick your city at the top and this goes straight to the person who covers it.
WhatsApp us about this