
Retrofit Smart Switch
Make your geyser or AC smart in 15 minutes
A 16mm WiFi module that sits behind your existing switch and turns one heavy appliance — geyser, AC or water pump — fully smart, with app, voice and automation. No rewiring, no change to your switch plate.
1Switch
16APer channel
16mmThin module
What the hardware does
Single heavy-duty channelRuns one big appliance — AC, geyser or pump — directly.
16A relayRuns a heavy load directly — even an AC or geyser.
16mm ultra-thinFits behind any standard switchboard. Plates stay unchanged.
Isolated SMPSSafe, stable power with under 0.8W standby draw.
Surge protection2.5KV rated, tested up to 4KV — protects every connected load.
2-way switchingWorks with existing two-way wiring.
What the app does
Auto-off timerGeyser or AC off after a set time — fires even when switched on at the wall, the way it saves on the bill.
Safe Mode + WhatsApp alertDisconnects your AC or geyser above 280V or below 200V and sends a WhatsApp alert — guards an expensive appliance.
Schedules & sunrise/sunsetDaily schedules and GPS sunrise/sunset triggers that keep running locally, even offline.
Energy & running hoursSee estimated energy cost and running hours, with a full who/when/how ON/OFF history.
Voice, NFC & shortcutsSiri, Google and Alexa, NFC tap actions and one-tap home-screen shortcuts.
Works from your wall switchYour existing switch still works — and the auto-off timer fires no matter how it's turned on.
Full specification
| Module thickness | 16mm |
|---|---|
| Operating voltage | 240V AC, 50/60Hz |
| Channels | 1 |
| Relay rating | 16A |
| Max load — incandescent/resistive | 1800W |
| Max load — LED | 200W / 6 units |
| Max load — inductive | 800W |
| Power supply | Isolated SMPS |
| Standby power | Less than 0.8W |
| Surge protection | 2.5KV rated, tested to 4KV |
| 2-way switching | Supported |
| Connectivity | WiFi — direct to cloud, no hub |
| Offline control | Yes — schedules, timers, wall switch |
| Voice assistants | Google, Alexa, Siri, HomeKit |
| Warranty | 3 years |
Common questions
Does the LPF Retrofit 1 Switch need a neutral wire?
Yes. Every Beakn product needs a neutral wire at the switchboard. Most Indian homes built in the last 15 years have one. If you are not sure, send us a photo of your switchboard on WhatsApp and we will check it for you.
Does it work without internet?
Yes — schedules, timers, wall switch
Which voice assistants does it work with?
Google, Alexa, Siri, HomeKit.
Do I need a separate hub or gateway?
WiFi — direct to cloud, no hub
What warranty does it come with?
3 years
What power supply does it need?
It runs on 240V AC, 50/60Hz.
Ask about the LPF Retrofit 1 Switch
Your local Beakn person is .
Pick your city at the top and this goes straight to the person who covers it.
WhatsApp us about this

